Compliance & Test Reports
Manufacturer-issued declarations, approvals and independent test information relevant to products represented by Canalli UK. Each entry names who issued it, what it covers, and where to view the source directly.
01ONKA
DIN-rail terminal systems
Independent certification below currently covers the MRK screw-clamp and OPK push-in series. MPK mini push-in terminals and the DIN mounting rail state their design standard as a manufacturer specification on their own product pages — see MPK — and no current public third-party document naming them specifically was found as of September 2026.
| Document | Type | Product scope | Standard | Issuer | Status | Source |
|---|---|---|---|---|---|---|
| Certificate of Conformity to Turkish Standards (Licence 007896-TSE-01/02) Ref. 007896-TSE-01/02 | TSE licence | MRK screw-clamp terminal blocks | TS EN 60947-7-1, TS EN 60947-1 | Türk Standardları Enstitüsü (Turkish Standards Institution) | Reverification required Stated expiry 19 October 2026 has passed. Re-check against the official source below before this is presented as current again. Renewed 17 October 2024, superseding this same licence's previous 19 October 2024 expiry. An earlier, now out-of-date printing of the licence remains visible on onka.uk — that copy is stale, not this one. Checked 17 September 2026 | View manufacturer source ↗ |
| UL Certificate of Compliance E351153 — MRK series Ref. E351153 | UL Recognized Component | MRK series screw-clamp terminal blocks (the specific catalogue numbers listed on the certificate addendum) | UL 1059, CSA C22.2 No. 158 | UL LLC | Current Certificate dated 21 October 2022. UL Recognized Component certificates carry no fixed expiry and run until superseded or withdrawn; no evidence of either was found. Checked 17 September 2026 | View manufacturer source ↗ |
| UL Certificate of Compliance E351153 — OPK series Ref. E351153 | UL Recognized Component | OPK 2.5 mm² and 4 mm² push-in terminal blocks only (screw and covered variants) — not the OPK Slim or 6 mm² blocks | UL 1059, CSA C22.2 No. 158 | UL LLC | Current Certificate dated 21 October 2022. Same basis certificate as the MRK row above; this is its OPK-scoped addendum, which lists only the four catalogue numbers stated in Product scope. No evidence of supersession or withdrawal was found. Checked 17 September 2026 | View manufacturer source ↗ |
02CANALLI
Slotted panel trunking
An independent laboratory fire-hazard test report exists for a Canalli-branded slotted panel trunking sample. It is not a certificate, and it does not establish a UL 94 flammability classification — the tests it covers are a glow-wire test and a horizontal flame test, not the vertical test that classification requires.
- TS EN 60695-2-11
- Glow-wire flammability, 960 °C
- No ignition observed on the tested sample.
- TS EN 60695-11-10
- 50 W horizontal flame test (method A)
- No ignition observed on the tested sample.
- Laboratory
- TTAL / AFB Enerji Mühendislik
TÜRKAK accreditation AB-1895-T (TS EN ISO/IEC 17025:2017) - Report
- 2412.4-01/25 — 23 January 2025
Independent laboratory test report, not a certificate. The complete report is held on file. It is not published on this website: the laboratory has not yet confirmed publication permission, so no download is offered here.
Questions about a specific document or product standard? Send us an enquiry.